Thick sintered diamond saw blade
The Hi-Tech Diamond black, thick sintered diamond saw blade is manufactured using premium diamond grit (270#/325#) that is secured into a metal bond, extending the full depth of the rim. This blade uses sintered technology, which increases their life span compared to notched rim saw blades because diamonds are continuously exposed as the edge of the blade wears away, cut after cut. Thick kerfs and stiff cores make these blades suitable for industrial lapidary cutting and slabbing agates, geodes, tile and ceramic.
All saw blades have 5/8" arbors and come with 1/2" bushings.
Please note: The 6" and 8" saw blades look different than the 10", yet serve the same purpose. These blades must be run with a lubricant such as water or oil. NEVER run dry! We recommend using a good quality cutting oil with these blades. To enhance the performance and life span of these blades, abide by the recommended operating speeds and spin-dry your blade after use to prevent any rusting.
Good Solid Blade for a 6 inch wet saw, all I cut is Agates and I cut a lot of them, this blade works very well and with only water for a lubricant, cleanup is so much easier and faster. If you want a workhorse this is the blade for you.
I was using the red blade to cut slabs, but this one is a lot better
A very sturdy blade that easily cuts thru the hardest material. It's the only blade I use except when cutting very small pieces.
As of this date I haven't used the blade.
Love this 6" saw blade, easily outperforms other competitors' blades,
that cost more.