Thin sintered diamond saw blade
Thin sintered diamond saw blade
Thin sintered diamond saw blade
Thin sintered diamond saw blade
Thin sintered diamond saw blade
Thin sintered diamond saw blade

Thin sintered diamond saw blade

SKU: SS04

$30
Diameter:
Blade Specifications:
Quantity:

The extremely durable Hi-Tech Diamond thin sintered diamond saw blade is manufactured using premium diamond grit (325#/400#) that is secured into a metal bond, extending the full depth of the rim. This blade uses sintered technology, which increases their life span compared to notched rim saw blades because diamonds are continuously exposed as the edge of the blade wears away, cut after cut. Thin rims make these blades suitable for cutting and trimming material such as quartz, topaz, glass and fine agates.

All saw blades have 5/8" arbors and come with 1/2" bushings.

Important purchasing note: The 8" saw blade comes either in red or black. This does not affect the performance of the blade. 

Please note: These diamond saw blades must be run with a lubricant such as water or oil. NEVER run dry! We recommend using a good quality cutting oil with these blades. To enhance the performance and life span of these blades, abide by the recommended operating speeds and spin-dry your blade after use to prevent any rusting.

Customer Reviews

Based on 95 reviews
76%
(72)
9%
(9)
4%
(4)
4%
(4)
6%
(6)
B
Bruce Wilken
Wears out pretty fast

Virtually all of my work is with agates. These blades only get about 2-3 slices of a 1" by 1.5" rock and then the blade is dull. Then you use the carbide stick to sharpen it - but, the carbide stick is like butter on the blade no matter how slow you push it through. It would be pretty easy to use up an entire carbide stick in one day. I don't 'force' the rock through the blade so as to not put extra wear on the motor, thus it takes a long time to just cut one rock.

Hi Bruce - Thank you for taking the time to share your experience. Agate is a very hard material, but you should still be getting better performance from your thin sintered saw blade than what you’ve described. One thing we’d like to clarify is the sharpening process. The dressing stick is designed to expose fresh diamond by removing some of the metal bond, so some wear of the stick is expected. However, if you’re needing to dress the blade after only 2–3 slices and going through the stick that quickly, we’d like to take a closer look at your setup and cutting conditions. Please reach out to our Hi-Tech Diamond support team so we can help troubleshoot the blade, coolant/lubrication, feed rate, and saw setup with you. We appreciate the detailed feedback and would like the opportunity to help you get better cutting performance.

S
Sarah Penhaligon

My go to blade. Tried and tested.

c
charles terry
10 inch sintered blade

Cuts through agates like butter. Made my life a little easier.
Could be named "Agate Blaster 2000".

W
Works great , cut many rocks. I am glad I went with the 10”
Positive feedback on the system thanks.

Great product, use it a the time.

R
R U
Expensive

At the price 25% off still expensive and had to pay shipping ?

Hi there - Thank you for your feedback. We understand that shipping costs can be frustrating. To help our customers save, we offer FREE shipping to the lower 48 U.S. states on orders over $200. We truly appreciate your business and hope you'll give us another opportunity to serve you in the future.

123

You may also like